Print Back
AMS-5906 / 5913, ASTM-A-666

Physical Properties
  • Minimum Tensile Strength - 185 ksi
  • Minimum Yield Strength (0.2% Offset) - 140 ksi
  • Elongation in 2 Inches (0.005 to 0.0150" Thick) - 3%
  • Elongation in 2 Inches (Over 0.0150" Thick) - 5%
  • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable)
Unit of Measure

Specifications

Width

24 in

Length

24 in

Alloy

T302 / 304 Stainless Steel Alloy

Thickness

0.0030 in

Thickness Tolerance

10 %

American Society for Testing and Materials (ASTM) Steel Standard

ASTM-A-666

Aerospace Material Specification (AMS)

AMS-5906 / 5913

Alloy Steel Type

Stainless Steel

Material Form

Sheet

Temper

Full Hard Temper

Chemical Composition

Maximum Carbon Composition

0.08 %

Maximum Manganese Composition

2.00 %

Maximum Silicon Composition

1.00 %

Maximum Phosphorus Composition

0.04 %

Maximum Sulfur Composition

0.03 %

Maximum Chromium Composition

19.00 %

Maximum Nickel Composition

10.00 %

Maximum Molybdenum Composition

0.75 %

Maximum Copper Composition

0.75 %

Chemical Composition Table



Physical Properties

Minimum Tensile Strength

185 ksi

Minimum Yield Strength (0.2 Percent (%) Offset)

140 ksi

Minimum Elongation in 2 Inch (in) (0.005 to 0.0150 Inch (in) Thick)

3 %

Minimum Elongation in 2 Inch (in) (Over 0.0150 Inch (in) Thick)

5 %
Minimum Hardness1 41 Rockwell C
  • 1 Product shall not be rejected on the basis of hardness if tensile properties are acceptable