Thin Metal Sheets
Thin Metal Sheets
15047 Sierra Bonita Lane
Chino, CA 91710
T: (909) 393 2273
F: (909) 393 2811
Email: support@thinmetalsheets.com
Print Back
AMS-5516 / 5513, ASTM-A-666 / A-240

Physical Properties
  • Minimum Tensile Strength - 75 ksi
  • Minimum Yield Strength (0.2% Offset) - 30.0 ksi
  • Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
  • Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
  • Elongation in 2 Inches (Over 0.004" Thick) - 40%
  • Maximum Hardness - 92 HRB (Hardness for ref. only)
0.0040 Inch (in) Thickness Stainless Steel Sheets
Unit of Measure
Items 0.0040 Inch (in) Thickness Stainless Steel Sheets
T302 / 304 Annealed 0.0040" x 24" x 36"
T302 / 304 Annealed 0.0040" x 24" x 36"
List Price $140.00
Description N/A AMS-5516 / 5513, ASTM-A-666 / A-240

Physical Properties
  • Minimum Tensile Strength - 75 ksi
  • Minimum Yield Strength (0.2% Offset) - 30.0 ksi
  • Elongation in 2 Inches (0.002 to 0.003" Thick) - 30%
  • Elongation in 2 Inches (0.003 to 0.004" Thick) - 35%
  • Elongation in 2 Inches (Over 0.004" Thick) - 40%
  • Maximum Hardness - 92 HRB (Hardness (for ref. only)
Width N/A 24 in
Length N/A 36 in
Alloy N/A T302 / 304 Stainless Steel Alloy
Thickness N/A 0.0040 in
Thickness Tolerance N/A 5 %
American Society for Testing and Materials (ASTM) Steel Standard N/A ASTM-A-666 / A-240
Aerospace Material Specification (AMS) N/A AMS-5516 / 5513
Alloy Steel Type N/A Stainless Steel
Material Form N/A Sheet
Temper N/A Annealed Temper
Maximum Carbon Composition N/A 0.08 %
Maximum Manganese Composition N/A 2.00 %
Maximum Silicon Composition N/A 1.00 %
Maximum Phosphorus Composition N/A 0.04 %
Maximum Sulfur Composition N/A 0.03 %
Maximum Chromium Composition N/A 19.00 %
Maximum Nickel Composition N/A 10.00 %
Maximum Molybdenum Composition N/A 0.75 %
Maximum Copper Composition N/A 0.75 %
Chemical Composition Table N/A

Minimum Tensile Strength N/A 75 ksi
Minimum Yield Strength (0.2 Percent (%) Offset) N/A 30.0 ksi
Minimum Elongation in 2 Inch (in) (0.002 to 0.003 Inch (in) Thick) N/A 30 %
Minimum Elongation in 2 Inch (in) (0.003 to 0.004 Inch (in) Thick) N/A 35 %
Minimum Elongation in 2 Inch (in) (Over 0.004 Inch (in) Thick) N/A 40 %
Maximum Hardness N/A 92 Rockwell B