Request Information
AMS-5529, ASTM-A-693

Physical Properties
  • Minimum Tensile Strength - 200 ksi
  • Minimum Yield Strength (0.2% Offset) - 175 ksi
  • Elongation in 2 Inches - 1%
  • Maximum Hardness - 41 HRC (Product shall not be rejected on the basis of hardness if tensile properties … are acceptable. This is a heat treatable alloy (CH-900) - expected physical properties are available on a per lot, per request basis.)
Unit of Measure

Specifications

Width

 N/A 12 in

Length

 N/A 12 in

Alloy

 N/A 17-7PH Stainless Steel Alloy

Thickness

 N/A 0.0050 in

Thickness Tolerance

 N/A 5 %

American Society for Testing and Materials (ASTM) Steel Standard

 N/A ASTM-A-693

Aerospace Material Specification (AMS)

 N/A AMS-5529

Alloy Steel Type

 N/A Stainless Steel

Material Form

 N/A Sheet

Temper

 N/A Condition 'C' Temper

Chemical Composition

Maximum Carbon Composition

 N/A 0.09 %

Maximum Manganese Composition

 N/A 1.00 %

Maximum Silicon Composition

 N/A 1.00 %

Maximum Phosphorus Composition

 N/A 0.04 %

Maximum Sulfur Composition

 N/A 0.03 %

Maximum Chromium Composition

 N/A 18.00 %

Maximum Nickel Composition

 N/A 7.75 %

Maximum Aluminum Composition

 N/A 1.50 %

Chemical Composition Table

 N/A

Physical Properties

Minimum Tensile Strength

 N/A 200 ksi

Minimum Yield Strength (0.2 Percent (%) Offset)

 N/A 175 ksi

Minimum Elongation in 2 Inch (in)

 N/A 1 %
Minimum Hardness1 N/A 41 Rockwell C
  • 1 Product shall not be rejected on the basis of hardness if tensile properties are acceptable